Skip to main content
  • Research article
  • Open access
  • Published:

A comparative study of extraction techniques for maximum recovery of glutamate decarboxylase (GAD) from Aspergillus oryzae NSK

Abstract

Background

γ-Amino butyric acid (GABA) is a major inhibitory neurotransmitter of the mammalian central nervous system that plays a vital role in regulating vital neurological functions. The enzyme responsible for producing GABA is glutamate decarboxylase (GAD), an intracellular enzyme that both food and pharmaceutical industries are currently using as the major catalyst in trial biotransformation process of GABA. We have successfully isolated a novel strain of Aspergillus oryzae NSK that possesses a relatively high GABA biosynthesizing capability compared to other reported GABA-producing fungal strains, indicating the presence of an active GAD. This finding has prompted us to explore an effective method to recover maximum amount of GAD for further studies on the GAD’s biochemical and kinetic properties. The extraction techniques examined were enzymatic lysis, chemical permeabilization, and mechanical disruption. Under the GAD activity assay used, one unit of GAD activity is expressed as 1 μmol of GABA produced per min per ml enzyme extract (U/ml) while the specific activity was expressed as U/mg protein.

Results

Mechanical disruption by sonication, which yielded 1.99 U/mg of GAD, was by far the most effective cell disintegration method compared with the other extraction procedures examined. In contrast, the second most effective method, freeze grinding followed by 10% v/v toluene permeabilization at 25°C for 120 min, yielded only 1.17 U/mg of GAD, which is 170% lower than the sonication method. Optimized enzymatic lysis with 3 mg/ml Yatalase® at 60°C for 30 min was the least effective. It yielded only 0.70 U/mg of GAD. Extraction using sonication was further optimized using a one-variable-at-a-time approach (OVAT). Results obtained show that the yield of GAD increased 176% from 1.99 U/mg to 3.50 U/mg.

Conclusion

Of the techniques used to extract GAD from A. oryzae NSK, sonication was found to be the best. Under optimized conditions, about 176% of GAD was recovered compared to recovery under non optimized conditions. The high production level of GAD in this strain offers an opportunity to conduct further studies on GABA production at a larger scale.

Background

Glutamate decarboxylase (GAD) is a unique enzyme that catalyzes the irreversible conversion of L-glutamic acid (Glu) to γ-aminobutyric acid (GABA) and carbon dioxide through a single step α-decarboxylation pathway. The cofactor that is involved in the pathway is pyridoxal phosphate [1]. GABA, a major inhibitory neurotransmitter, participates in all functions of the central nervous system (CNS) by blocking nerve impulses, without which or at low level will cause neurological disorders such as Parkinson’s disease, Huntington’s chorea, cognitive impairment, and etc [1, 2]. GABA also has additional physiological roles, which include lowering of blood pressure and cholesterol level, calming and tranquilizing influences, antidiabetic and diuretic effects, etc. [35]. Because of these therapeutic properties, GABA has the potential to be incorporated into commercially significant foods and pharmaceutical products. Since GAD is the specific enzyme that catalyzes the production of GABA, it could be an important addition to enzymes that are already used in the food and pharmaceutical industries, and thus the extraction of GAD from safe and reliable sources will play a crucial aspect in the production of GABA.

GAD can be found naturally in a rich diversity of organisms, ranging from microscopic organisms to higher plants and animals. It is primarily isolated from microbial sources including bacteria, yeasts and molds [69]. Among these sources, Aspergillus oryzae was frequently chosen for its ability to secrete various desired enzymes that are widely used in the production of fermented foods such as soysauce, vinegar etc [7]. GAD is reported as one of the enzymes that can be produced by this fungus [7, 9]. A further recognition as a Generally Recognized as Safe (GRAS) microorganism by the United States Food and Drug Administration (FDA) and World Health Organization makes it an attractive GABA-producing candidate to be safely utilized in funcitonal food production on an industrial scale (WHO) [10, 11]

In order to recover high amounts of GAD from the mycelia of A. oryzae, the method used to disintegrate the cells ideally should not affect the activity and properties of the enzyme [12]. The nature of GAD as an intracellular enzyme implies that an additional lysis step is required for the complete destruction of the cell wall in order to release the enzyme [13, 14]. Various cell disruption methods, either mechanical or non-mechanical, have been employed to release the protein content of fungal cells [1518]. Isolation of enzymes using non-mechanical means involves either chemical treatment or the use of lytic enzymes. The former affects the cells directly but may cause autolysis by intracellular enzymes, as has been reported for yeasts [19], while the latter is regarded as gentle to fungi cells with high specificity but they are costly in large-scale intracellular protein recovery [12, 15]. Furthermore, the complex composition of fungal cell walls may require a treatment that consists of a mixture of different enzymes, thus it might not be efficient.

Mechanical disruption means disruption of cells without the addition of either chemicals or enzymes. Generally, this technique of cell breakage is economical and suitable for large-scale preparations. However, it produces excessive heat, which needs to be monitored and controlled [20]. Among various mechanical methods, sonication is the most commonly applied mechanical methods for its ease of up-scaling process and it requires neither sophisticated instrument nor extensive technical training [21]. Fungal cells suspended in a liquid buffer are broken apart by intense sonic pressure waves generated by an ultrasonicator. The pressure waves create micro bubbles that grow and coalesce, vibrate violently and eventually causing implosions that generate high energy shock wave sufficient to disrupt cells [22]. Homogenization is another appropriate technique that may work well with cells that are difficult to be lysed e.g. fungi cells [20]. The cells are disrupted by high shear forces exerted from external pressure actions e.g. grinding via bead mill, high pressure homogenizer, pestle and tube homogenizer, etc [22, 23].

There are very few studies performed on the recovery of GAD from A. oryzae and thus the search for an effective technique that recovers high amounts of GAD from the fungus remains a significant area for exploratory study. In the present study, the efficiency of different cell disruption methods in maximizing the recovery of intracellular GAD from A. oryzae NSK was investigated.

Methods

Fungal strain

Aspergillus oryzae NSK (GenBank:JN381021) with high GABA biosynthesizing property was isolated from a koji sample produced by a local soy sauce processing plant and stored at -40°C on a PDA slant containing 20 (w/v) glycerol [24].

Materials

γ-Amino butyric acid (GABA), 5′-pyridoxal phosphate (5′PLP) and calcium chloride dihydrate were obtained from Sigma Aldrich Inc. (St. Louis, MO, USA). Methanol, toluene, hexane, acetone, chloroform, potato dextrose agar (PDA), Tween 80, glucose monohydrate, L-glutamic acid, magnesium sulfate heptahydrate, sodium carbonate, monopotassium phosphate, and Lactophenol Cotton Blue were purchased from Merck (Germany). Bacto™ yeast extract was from Becton, Dickinson & Company (USA). Yatalase® enzyme was purchased from Takara Shuzo Co. (Otsu, Shiga, Japan). Triton X-100, 3-[(3-Cholamidopropyl)dimethylammonio]-1-propanesulfonate (CHAPS), sodium dodecyl sulfate (SDS), and citric acid monohydrate were purchased from Acros Organics (Geel, Belgium). Trisodium citrate was sourced from Fisher Scientific (United States). All chemicals were of analytical reagent grade.

Conidia preparation and submerged cultivation of A. oryzae NSK

Conidia of A. oryzae NSK were prepared from a 5-day old culture on PDA (incubated at room temperature) by scraping them into 5.0 mL of 5 (w/v) Tween 80 under sterile condition. The number of conidia was determined using a hemocytometer. Conidia at 104 mL-1 cell concentration was inoculated in a medium (pH 5.5) containing 5 (w/v) glucose, 0.4% (w/v) L-glutamic acid, 0.1% (w/v) MgSO47H2O, 0.15% (w/v) KH2PO4, 0.6% (w/v) yeast extract and 0.2% (w/v) CaCl2.2H2O. The medium was then incubated for 3 days in an orbital shaker at 200 rpm and 37°C. Fungal mycelia that germinated from the conidia were harvested by filtration through a Whatman No. 4 nylon membrane filter and the filtrate was collected for the analysis of possible extracellular GAD activity [24].

Extraction of glutamate decarboxylase (GAD) from fungal mycelia

Mycelia at 10% (w/v) (wet weight basis) suspension were used throughout GAD extraction procedures. The mycelia were suspended in 50 mM citrate buffer (pH 5.5) and extraction was performed according to the procedures as described in Sections 2.5-2.9. GAD activity and soluble protein concentration were measured during the screening stage in order to monitor the efficiency of different extraction methods. Comparison of efficiency is made based on the specific activity. The best method was selected for further optimization. All experiments were carried out in triplicate.

Enzymatic lysis

Enzymatic lysis of mycelia was performed using different concentrations (3, 5, 10, 15, 20, & 25 mg/mL) of Yatalase®, an enzyme preparation that consists mainly of chitinase, chitobiase and β-1,3 glucanase, dissolved in 50 mM sodium citrate buffer, pH 5.5. Cell lysis was performed based on four parameters: cell concentration (5, 10, 20, 30, 40, 50, & 60% w/v), incubation temperature (25, 30, 35, 40, 45, 50, 55, 60, & 70°C), and incubation time (15, 30, 60, 120, 180, 240, & 300 min). Each of the parameter was optimized by maintaining all the other parameters at a constant value i.e. 10% (w/v) cell concentration, 60 min and 30°C incubation time and temperature, and 10 mg/mL of Yatalase®. At the end of the experiment, the cell suspension was centrifuged at 14,000 × g for 30 min at 4°C and the supernatant was analyzed for GAD activity (Takara Bio Inc.).

Chemical permeabilization

The effect of organic solvents on cell permeabilization was performed according to Klimek-Ochab et al [15] with some modification. Five types of organic solvents namely ethanol, toluene, acetone, chloroform and butanol were tested. A 10% (w/v) suspension of pre-ground mycelia according to the Section 2.7, was prepared in 1 mL of 50 mM citrate buffer, pH 5.5, containing 10% v/v organic solvent and shaken at room temperature (25°C) with different incubation time (30, 60, & 120 min). The cell suspension was then centrifuged at 14,000 × g for 30 min at 4°C and the supernatant was analyzed for GAD activity.

For detergent permeabilization, pre-ground mycelia were suspended separately in 0.2% (v/v) aqueous solutions of detergents (Triton X-100, CHAPS, Tween 80, and SDS) to give a working concentration of 10% cell (w/v), and incubated with shaking (200 rpm) at room temperature (25°C) under three different incubation time (30, 60, & 120 min) [15].

Cell breakage with liquid nitrogen

Mycelia were frozen rapidly using liquid nitrogen and ground into fine powder using a pre-chilled mortar and pestle. The ground mycelia were suspended in 50 mM citrate buffer, pH 5.5, to give a working concentration of 10% (w/v) and vortexed for 1 min. The cell suspension was then centrifuged at 14,000 × g for 30 min at 4°C and supernatant was analyzed for GAD activity.

High speed homogenization

Mycelia (10% w/v) were suspended in 50 mL of cold citrate buffer (4°C). The suspension was placed in a salt ice-water bath and the cells were disrupted using a high speed homogenizer (Miccra D-9, Germany) at different speed (14,000, 16,000, 18,000, 21,000, & 24,000 rpm). The cell suspension was then centrifuged at 14,000 × g for 30 min at 4°C and the supernatant was analyzed for enzyme activity.

Sonication

Mycelia (10% w/v) were suspended in 10 mL of cold citrate buffer (4°C) and disrupted with an ultrasonic homogenizer (Biologics, Inc., USA) at 50% of pulser, 30 W for a total of 10 min in a salt ice-water bath. Sonication was stopped every 30 s to allow the cell suspension to cool down for 30 s. Centrifugation was performed at 14,000 × g for 30 min and the resulting supernatant was examined for GAD activity.

One-Variable-at-a-Time (OVAT) methodology for optimizing the sonication protocol

Sonication was performed in an ice-water bath using a Biologics Inc. (USA) ultrasonic homogenizer at 20 kHz. All sonication parameters, except the one being optimized, were maintained at 50% pulser, 10% cell concentration, 10 mL cell suspension in 50 mM citrate buffer, pH 5.5, and 30 W acoustic power. The investigated variables were cell concentration [2, 4, 6, 8, 10, 12, and 14% (w/v)], cell suspension volume (4, 6, 8, 10, and 12 mL), acoustic power (10, 20, 30, 40, and 50 W) and sonication time (5, 10, 15, 20, and 25 min) on a discontinuous mode (30 s of sonication cycle followed by a cooling interval of 30 s). The distance between the sonicator tip and the base of sample holder was maintained at a distance of 2 cm throughout the experiment. All experiments were carried out in triplicate.

Determination of GAD activity

Enzyme solution (0.1 mL) was mixed with 0.9 mL of reaction mixture comprising 50 mM L-glutamic acid and 50 μM PLP in 100 mM citrate buffer at pH 5.5 and incubated at 37°C for 30 min. The reaction was terminated by the addition of 1.0 mL of 0.5 M Na2CO3 solution [10]. The mixture was then centrifuged at 14,000 × g for 30 min at 4°C. The concentration of the product of reaction (GABA) was determined according to the method of Rossetti and Lombard (1996) [25]. Results of assay were obtained in triplicate. One unit of GAD activity is defined as the amount of GAD that produces 1 μmol of GABA per min per mL extract (U/mL) while the specific activity is defined as GAD activity (U) per mg protein (U/mg).

Determination of GABA

The concentration of the product of reaction (GABA) was determined according to the method of Rossetti and Lombard (1996) [25]. A 100 μL aliquot of supernatant (or of standard solution of GABA) was dried under vacuum. The residue was dissolved in 20 μL of ethanol-water-triethylamine mixture (2:2:1 v/v) and evaporated to dryness under vacuum. A 30 μL volume of ethanol-water-triethylamine-PITC (7:1:1:1 v/v/v) mixture was then added to the residue and allowed to react for 20 min at room temperature to form PITC-GABA. The excess reagent was then removed under vacuum. The dry residue containing PITC-GABA was dissolved in 200 μL of the mobile phase, consisting of a mixture of 60% Solution A (aqueous solution of 8.205 g sodium acetate, 0.5 mL triethylamine, and 0.7 mL acetic acid in 1000 mL) adjusted to pH 5.8, 28% Solution B (deionized water), and 12% Solution C (acetonitrile). Gradient HPLC separations were performed on a Shimadzu LC 20AT apparatus, consisting of pump system, a CT0-10ASVP model oven with a 20 μL injection loop injector, and a Model SPD-M20A PDA detector, in conjunction with a DELL Model DELL Optiplex integrator. A Hypersil Gold C-18 column (250×4.6 mm I.D., particle size 5 μm; Thermoscientific, Meadow, UK) was used for separation purposes. Separation was performed at flow rate of 0.6 mL/min, 37°C and wavelength used was UV 254 nm.

Protein assay

Protein concentration was determined according to Bradford [26] with a protein assay kit (Merck, USA) and bovine serum albumin was used as the protein standard.

Microscopic examination of fungal mycelia

Mycelia before and after all mechanical disruptions were examined using a light microscope after staining with Lactophenol Cotton Blue [27]. Magnification was between 4- to 40-fold.

Statistical Analysis

All experiments were conducted in triplicate. Statistical analysis of the data was carried out using Statistical Analysis System (SAS, Institute Inc, 1988).

Results and discussion

Comparison of enzymatic lysis, chemical permeabilization and mechanical disruption on GAD yields

Recently, a novel strain of A. oryzae NSK with high GABA biosynthesizing property was isolated from koji samples provided by an industrial soy sauce processing plant [24]. In order to determine the capability of this strain in the bioconversion of L-glutamate to GABA, it is necessary to develop an efficient method that is able to recover high amounts of GAD. In this study, three different extraction techniques namely enzymatic lysis, chemical permeabilization, and mechanical disruption were examined.

Enzymatic lysis

A commercial lytic enzyme, Yatalase®, capable of releasing GAD from a fungal source has been suggested elsewhere [7]. Studies were conducted to assess the efficiency of enzymatic lysis by evaluating the effect of incubation time (min), Yatalase® concentration (mg/ml), cell concentration (% w/v), and incubation temperature (˚C) on the release of GAD from fungal cell (Additional file 1). Subsequently, the results demonstrated that maximum GAD yield was achieved when 30% (w/v) of cell concentration was incubated with 3 mg/mL of Yatalase at 60°C for 30 min and the final GAD yield obtained was 0.70 U/mg (Table 1). A plausible explanation to high yields of GAD at temperature of 60°C may be due to thermal-induced autolysis of fungus cells rather than enzyme-induced release [28], since Yatalase®’s optimal temperature is 37°C (Clontech Laboratories, Inc.). These results also revealed an interesting finding of which the GAD extracted from A. oryzae NSK may possess excellent thermo stability although this is in contrast to the results obtained by Tsuchiya et al [10] where GAD purified from A. oryzae was found to be thermally stable below 40°C.

Table 1 Comparison of different cell disintegration techniques in the recovery of GAD

Chemical permeabilization

The efficiency of solvent permeabilization was examined using five different solvents with hydrophobicity (Log P) ranging from -0.24 to 2.69 (Table 1). Different types of detergents were also assessed for their efficiency as cell permeabilizing agents in releasing GAD from pre-ground mycelia. According to Taubert et al [12], the main location at which cell permeabilization occurs is the outer layer of the hyphae that serves as the diffusion barrier against permeabilizing agents. Based on this concept, the fungal mycelia were first disrupted by grinding the mycelia frozen by liquid nitrogen prior to incubation with the permeabilizing agents. Among all of the solvents used in cell permeabilization, 10% toluene-assisted extraction (Log P = 2.14) at 25°C for 120 min yielded the highest GAD (0.97 U/mg), followed by chloroform (Log P = 2.69) with a specific activity of 0.88 U/mg. The use of acetone (Log P = -0.24) led to a yield of 75.25% lesser than toluene-assisted extraction.

In detergent permeabilization, the highest GAD yield of 0.93 U/mg was obtained when the fungus was treated with 0.2% Triton X-100 at 25°C for 120 min (Table 1). On the other hand, SDS yielded the least amount of intracellular enzyme, which might be due to the possibility of destructive impacts that were contributed by the ionic interactions between the enzymes and detergent residues [15].

Mechanical disruption

High speed homogenization and sonication were employed as the mechanical means of cell disruption in this study. High speed homogenization recorded an optimum GAD yield of 0.25 U/mg under homogenization speed of 18,000 rpm. On the other hand, disruption of 10% (w/v) cell concentration by sonication at 50% of pulser and 30 W of acoustic power for 10 min has produced GAD yield of 1.99 U/mg. The results of all of the cell disruption methods are summarized in Table 1 and it shows that sonication method was the most efficient method to recover intracellular GAD from A. oryzae. The GAD yield of sonication method was 284% higher compared to other cell disruption methods namely enzymatic lysis and about 221% higher compared to treatment with detergent and solvent.

Furthermore, the degree of cell disruption by various cell disruption methods was also determined by microscopic examination of cell debris. Prior to cell disruption, A. oryzae appears as filamentous mycelia pellets under 10X magnification (figure 1a) and its filaments appears as interwoven complex of hyphae under 40X magnification (figure 1b). Among all the cell disruption techniques, the mycelia under sonication were found to be completely disintegrated and uniformly dispersed in the suspension (Figure 1g). On the other hand, the formation of clustered hyphae resulted from toluene permeabilization shows partial disruption evidently (1e & 1f). As for enzymatic lysis (Figure 1c and 1d), the hyphae were seen largely intact under microscopy, incidentally, it also produced the lowest yield of GAD among all the methods employed. From these observations, it is noteworthy that complete cell disruption gave higher yield as it allows more intracellular content to be released and in turn increasing the GAD yield. The efficiency of sonication method in GAD extraction have led to further optimization of its critical parameters in order to recover the maximum amount of GAD from fungal cells.

Figure 1
figure 1

Light microscopy of mycelia from A. oryzae NSK before and after cell disruption. (a) Original structure of mycelia before cell disruption with X4 magnification; (b) Original structure of mycelia before cell disruption with X40 magnification; (c) Enzymatic lysis by Yatalase® (30 min, 3 mg/ml, 30% w/v cell concentration, 60˚C) with X10 magnification; (d) Enzymatic lysis by Yatalase® with X40 magnification; (e) Cell permeabilized by toluene (0.2% (v/v) toluene, cell concentration 10% (w/v), 120 min, 25°C) with X10 magnification; (f) Cell permeabilized by toluene with X40 magnification; (g) After sonication with X10 magnification (cell concentration 12% (w/v), 8 mL suspension volume, 50 W & 20 min) and (h) After sonication with X40 magnification.

Optimization of sonication protocols

Four critical parameters of sonication including cell concentration (% w/v), buffer suspension volume (mL), acoustic power (watt), and sonication time (min) were optimized for the maximum recovery of GAD. The effect of cell concentration (% w/v) ranging from 2% to 14% was determined. As shown in Figure 2a, the maximum yield of GAD (1.55 U/mg) was obtained when 12% of cell concentration was applied but the yield decreased significantly (P < 0.05) when cell concentration was further increased. Similar observation was also reported by Saptarshi and Lele [17] whom demonstrated that the recovery of intracellular L-asparaginase is directly proportional to the cell concentration but reduction of enzyme yield occurred beyond the optimum cell concentration. This phenomenon could be due to the distortion of frequency on sonic wave’s passages and severe attenuation on sound intensity under highly saturated condition [16, 29]. Both effects cause the reduction in the cavitation zone and consequently the disruption of mycelia cell becomes less effective, which can be observed from Figure 2a where GAD activity and soluble proteins were started to decline at 12% of cell concentration.

Figure 2
figure 2

Optimization of sonication protocols on the recovery of GAD. (a) Effect of cell concentration (% w/v) on GAD release by suspending the mycelia in 10 mL of citrate buffer at pH 5.5 and sonicated at 20 Khz, 50 W for 10 min; (b) Effect of buffer suspension volume (mL) on GAD release by sonicate 10% (w/v) of mycelia at 20 Khz, 50 W for 10 min; (c) Effect of acoustic power (watt) on GAD release by suspending mycelia (10% w/v) in 10 mL of citrate buffer at pH 5.5 and sonicated at 20 Khz for 10 min; (d) Effect of sonication time (min) on GAD release by suspending mycelia (10% w/v) in 10 mL of citrate buffer at pH 5.5 and sonicated at 20 Khz and 50 W. Results represent the mean (± SD) of three experiments.

The effect of suspension volume is shown in Figure 2b, where the highest GAD activity was obtained at 6 mL of suspension volume. Increasing the volume further significantly decreased the recovered activity. A similar trend was reported by other researchers during the recovery of intracellular proteins such as L-asparaginase and hepatitis B core antigen [17, 18, 30]. The reason for this phenomenon is that at lower suspension volume, more sonic energy was dissipated per unit of volume causing the generation of extremely strong cavitation that led to the alteration of protein molecules and hence enzyme inactivation [31]. In contrast, reduction of GAD yield at bigger suspension volume might be due to the dilution of energy dissipated per unit of volume that reduced the cavitation and thus leading to the formation of large eddies [32]. Eddies with scales larger than a cell simply carry the cell from place to place and are not intense enough to cause effective cell disruption [17, 18, 32].

The effect of acoustic power (Watt) ranging from 10–50 W was also evaluated. Figure 2c depicts a linear relationship between the released GAD and acoustic power. Similar observation was also reported in the work of Ho et al. [18] where the intracellular hepatitis B-core antigen was released constantly without thermal denaturation when acoustic power was increased up to 180 W under proper control of temperature [18].

In addition to cell concentration and cell suspension volume, sonication time ranging from 5 min to 25 min on the release of GAD was also assessed. As shown in Figure 2d, the enzyme activity increased concomitantly with sonication time and the optimum yield (3.86 U/mg) was obtained following sonication for 15 min. Prolonged sonication significantly (p < 0.05) reduced the recovery of GAD. Several studies suggested that free radicals generated from the pyrolysis of water and ionization during prolonged sonication could inactivate the recovered intracellular enzymes [21, 33].

In comparison to other findings, A. oryzae NSK may require a longer sonication time (15 min) for complete disruption of cells based on the microscopic evidence (Figure 1) in order to release the intracellular GAD. Cell disruption process is largely dependent on the physical strength of microorganism cell wall and the location of intracellular enzyme [34]. According to Bowman and Free [35], the cell wall of Aspergillus sp. contain between 10 and 20% of chitin that enhances its tensile strength and cell wall rigidity, which implies that a longer sonication time is required to disrupt the integrity of the fungal cell wall. By combining the four optimum crucial parameters for sonication, the yield of GAD was successfully enhanced by 176% from 1.99 U/mg to 3.50 U/mg. Therefore, it can be concluded that sonication is the best approach to extract high yields of GAD from the fungal strain compared to other reported approaches such as enzymatic solubilization, non-ionic detergent, mechanical lysis and bead mill [7, 8]. The capability of A. oryzae NSK for producing high amount of GAD is useful for upscaling GABA production.

Conclusion

Ultrasonication was found to be the best approach to release the intracellular GAD from Aspergillus oryzae NSK compared to chemical and non-chemical cell disruption methods. The optimized sonication protocols employed (6 mL buffer suspension volume, 12% (w/v) cell concentration and 50 W acoustic power for 15 minutes) has successfully increased the yield of GAD by 176% from an unoptimized conditions. This is the first report pertaining to the comparison experimentation and optimization of GAD extraction procedures from a GABA-producing A. oryzae.

Authors’ information

ALYY is master student and MSAK is currently a PhD student. HMG and NS are professors of enzyme technology and food biochemistry respectively at Faculty of Food Science and Technology while RNZRAR is a professor at the Faculty of Biotechnology and Biomolecular Sciences.

Abbreviations

GAD:

Glutamate decarboxylase

GABA:

γ-aminobutyric acid

CHAPS:

3-[(3-Cholamidopropyl)dimethylammonio]-1-propanesulfonate

SDS:

Sodium dodecyl sulfate

PITC:

Phenylisothiocyanate.

References

  1. Krnjević K: Chemical nature of synaptic transmission in vertebrates. Physiol Rev. 1974, 54: 418-540.

    Google Scholar 

  2. Wong GT, Bottiglieri T, Snead C: GABA, γ-hydroxybutyric acid, and neurological disease. Ann Neurol. 2003, 6: 3-12.

    Article  Google Scholar 

  3. Brandão ML, De Aguiar JC, Graeff FG: GABA mediation of the anti-aversive action of minor tranquilizers. Pharmacol Biochem Behav. 1982, 16 (Suppl 3): 397-402.

    Article  PubMed  Google Scholar 

  4. Shimada M, Hasegawa T, Nishimura C, Kan H, Kanno T, Nakamura T, Matsubayashi T: Anti-hypertensive effect of gamma-aminobutyric acid (GABA)-rich Chlorella on high-normal blood pressure and borderline hypertension in placebo-controlled double blind study. Clin Exp Hypertens. 2009, 31 (Suppl 4): 342-354.

    Article  PubMed  CAS  Google Scholar 

  5. Soltani N, Qiu H, Aleksic M, Glinka Y, Zhao F, Liu R, Li Y, Zhang N, Chakrabarti R, Ng T, Jin T, Zhang H, Lu WY, Feng ZP, Prud'homme GJ, Wang Q: GABA exerts protective and regenerative effects on islet beta cells and reverses diabetes. Proc Natl Acad Sci U S A. 2011, 108 (Suppl 28): 11692-11697.

    Article  PubMed  CAS  PubMed Central  Google Scholar 

  6. Ueno Y, Hayakawa K, Takahashi S, Oda K: Purification and characterization of glutamate decarboxylase from Lactobacillus brevis IFO 12005. Biosci Biotech Biochem. 1997, 61 (Suppl 7): 1168-1171.

    Article  CAS  Google Scholar 

  7. Tsuchiya K, Nishimura K, Iwahara M: Purification and characterization of glutamate decarboxylase from Aspergillus oryzae. Food Sci & Tech Res. 2003, 9 (Suppl 3): 283-287.

    Article  CAS  Google Scholar 

  8. Yang SY, Lin Q, Lu ZX, Lu FX, Bie XM, Zou XK, Sun LJ: Characterization of a novel glutamate decarboxylase from Streptococcus salivarius ssp. thermophilus Y2. J Chem Tech & Biotech. 2008, 83: 855-861. 10.1002/jctb.1880.

    Article  CAS  Google Scholar 

  9. Kato Y, Kato Y, Furukawa K, Hara S: Cloning and Nucleotide Sequence of the Glutamate Decarboxylase-encoding Gene gadA from Aspergillus oryzae. Biosci Biotech Biochem. 2002, 66 (Suppl 12): 2600-2605.

    Article  CAS  Google Scholar 

  10. Partial List of Enzyme Preparations That are Used in Foods, US Food and Drugs Administration.http://www.fda.gov/food/ingredientspackaginglabeling/gras/enzymepreparations/ucm084292.htm,

  11. FAO/WHO: Evaluation of certain food additives and contaminants. Thirtieth Report of the Joint FAO/WHO Expert Committee on Food Additives. 1987, 15-16.http://whqlibdoc.who.int/trs/WHO_TRS_751.pdf,

    Google Scholar 

  12. Taubert J, Krings U, Berger RG: A comparative study on the disintegration of filamentous fungi. J Microbiol Meth. 2000, 42: 225-232. 10.1016/S0167-7012(00)00194-9.

    Article  CAS  Google Scholar 

  13. Strigácová J, Chovanec P, Liptaj T, Hudecová D, Turský T, Simkovic M, Varecka L: Glutamate decarboxylase activity in Trichoderma viride conidia and developing mycelia. Arch Microbiol. 2001, 175: 32-40. 10.1007/s002030000235.

    Article  PubMed  Google Scholar 

  14. Kumar S, Punekar N: The metabolism of 4-aminobutyrate (GABA) in fungi. Mycol Res. 1997, 101 (Suppl 4): 403-409.

    Article  CAS  Google Scholar 

  15. Klimek-Ochab M, Brzezinska-Rodak M, Zymanczyk-Duda E, Lejczak B, Kafarski P: Comparative study of fungal cell disruption-scope and limitations of the methods. Folia Microbiol. 2011, 56: 469-475. 10.1007/s12223-011-0069-2.

    Article  CAS  Google Scholar 

  16. Belur PD, Mugeraya G, Nainegali B: Release of cell associated tannase of Serratia ficaria DTC by sonication, surfactants and solvents. Asian J Biotech. 2011, 3: 91-97.

    Article  CAS  Google Scholar 

  17. Saptarshi SD, Lele SS: Application of evolutionary optimization technique in maximizing the recovery of L-asparaginase from E. caratovovora MTCC 1428. Glob J Biotech Biochem. 2010, 5 (Suppl 2): 97-105.

    CAS  Google Scholar 

  18. Ho CW, Chewa TK, Ling TC, Kamaruddin S, Tan WS, Tey BT: Efficient mechanical cell disruption of Escherichia coli by an ultrasonicator and recovery of intracellular hepatitis B core antigen. Proc Biochem. 2006, 41: 1829-1834. 10.1016/j.procbio.2006.03.043.

    Article  CAS  Google Scholar 

  19. Breddam K, Beenfeldt T: Acceleration of yeast autolysis by chemical methods for production of intracellular enzymes. Appl Microbiol Biotechnol. 1991, 35: 323-329.

    Article  CAS  Google Scholar 

  20. Ahmed H: Extraction of Protein. Principles and Reactions of Protein Extraction, Purification, and Characterization. Edited by: Vasta GR. 2005, Baltimore: CRC Press, 17-21.

    Google Scholar 

  21. Chisti Y, Young MM: Disruption of microbial cells for intracellular products. Enz Microbiol Tech. 1986, 8: 196-204.

    Article  Google Scholar 

  22. Middelberg APJ: Process-scale disruption of microorganisms. Biotech Adv. 1995, 13 (Suppl 3): 491-551.

    Article  CAS  Google Scholar 

  23. Ho CW, Tan WS, Yap WB, Ling TC, Tey BT: Comparative evaluation of different cell disruption methods for the release of recombinant hepatitis B core antigen from Escherishia coli. Biotechnol Bioproc Eng. 2008, 13 (Suppl 5): 577-583.

    Article  CAS  Google Scholar 

  24. Ab Kadir MS: Enhancement of γ-aminobutyric acid from Aspergillus oryzae in batch fermentation. 2011, Master thesis: Universiti Putra Malaysia, Food Science Department

    Google Scholar 

  25. Rosetti V, Lombard A: Determination of glutamate decarboxylase by high performance liquid chromatography. J chroma. 1996, 681: 63-67. 10.1016/0378-4347(96)88202-8.

    Article  Google Scholar 

  26. Bradford MM: A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principles of protein-dye binding. Anal Biochem. 1976, 72: 248-254. 10.1016/0003-2697(76)90527-3.

    Article  PubMed  CAS  Google Scholar 

  27. Kormanik PP, McGraw AC: Quantification of vesicular-arbuscular mycorrhizae in plant roots. Methods and Principles of Mycorrhizal Research. Edited by: Schenck NC. 1982, Minnesota: APS press, 37-40.

    Google Scholar 

  28. Huang B, Lin W, Cheung PC, Wu J: Differential proteomic analysis of temperature-induced autolysis in mycelium of Pleurotus tuber-regium. Curr Microbiol. 2011, 62 (Suppl 4): 1160-1167.

    Article  PubMed  CAS  Google Scholar 

  29. Gogate PR, Wilhelm AM, Pandit AB: Some aspects of the design of sonochemical reactors. Ultrason Sonochem. 2003, 10: 325-330. 10.1016/S1350-4177(03)00103-2.

    Article  PubMed  CAS  Google Scholar 

  30. Feliu JX, Villa VA, Cubarsi R: Optimized release of recombinant protein by ultrasonication of Escherichia coli. Biotechnol Bioeng. 1998, 58 (Suppl 5): 36-40.

    Google Scholar 

  31. Dagbagli S, Goksungur Y: Optimization of β-galactosidase production using Kluyveromyces lactis NRRL Y-8279 by response surface methodology. Electron J Biotechnol. 2008, 11: 1-12.

    Article  Google Scholar 

  32. Doulah MS: Mechanism of disintegration of biological cells in ultrasonic cavitation. Biotechnol Bioeng. 1977, 19 (Suppl 5): 649-660.

    Article  PubMed  CAS  Google Scholar 

  33. Rachinskaya ZV, Karasyova EI, Metelitza DI: Inactivation of glucose-6-phosphate dehydrogenase in solution by low and high frequency ultrasound. Appl Biochem Microbiol. 2004, 40: 120-128.

    Article  CAS  Google Scholar 

  34. Kuboi R, Umakoshi H, Takagi N, Komasawa I: Optimal disruption methods for the selective recovery of β-Galactosidase from Escherichia coli. J Ferment Bioeng. 1995, 79 (Suppl 4): 335-341.

    Article  CAS  Google Scholar 

  35. Bowman SM, Free SJ: The structure and synthesis of fungal cell wall. BioEssays. 2006, 28 (Suppl 8): 799-808.

    Article  PubMed  Google Scholar 

Download references

Acknowledgements

This research was fully supported by the Fundamental Grant (05-10-07-380 FR) from the Ministry of Higher Education, Malaysia, which was awarded to Nazamid Saari.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Nazamid Saari.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

ALYY performed all data acquisition, data analyses, and manuscript writing. MSBA-K isolated the fungal strain of Aspergillus oryzae NSK and optimized its fermentation media. HMG, RNZRAR and NS contributed to conception of the study, experimental design, and revision of the manuscript. All authors read and approved the final manuscript.

Electronic supplementary material

13104_2012_2532_MOESM1_ESM.pdf

Additional file 1:Optimization of the condition of enzymatic lysis on the recovery of GAD by using Yatalase®. (a) Effect of incubation time (min) of Yatalase® (10 mg/ml) on 10% (w/v) of mycelia at 30°C in 50 mM Citrate buffer, pH 5.5. (b) Effect of concentration of lytic enzyme on mycelia (10% w/v) at 30°C for 60 min. (c) Effect of cell concentration (% w/v) on the enzymatic lysis of Yatalase® (10 mg/ml) at 30°C for 60 min. (d) Effect of incubation temperature on the enzymatic lysis of Yatalase® (10 mg/ml) at 10% (w/v) of mycelia for 60 min. Results represent the mean (± SD) of three experiments. (PDF 239 KB)

Authors’ original submitted files for images

Below are the links to the authors’ original submitted files for images.

Authors’ original file for figure 1

Authors’ original file for figure 2

Rights and permissions

Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Lee Ying Yeng, A., Kadir, M.S.A., Ghazali, H.M. et al. A comparative study of extraction techniques for maximum recovery of glutamate decarboxylase (GAD) from Aspergillus oryzae NSK. BMC Res Notes 6, 526 (2013). https://doi.org/10.1186/1756-0500-6-526

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1756-0500-6-526

Keywords